---
title: BLEND
description: "BLEND command is used to create a smooth spline curve that connects two selected lines, arcs, elliptical arcs, spirals, open polylines, or open splines. Below are the detailed steps to use this command: 1. **Access the Command**: - Type `BLEND` or `BLE` in the…"
url: "https://www.dwgsee.com/cad/support/docs/blend/"
updated: "2025-04-23"
category: User Guide / Create Objects
tags:
  - BLEND
  - Command Line
  - Spline
---

# BLEND

BLEND command is used to create a smooth spline curve that connects two selected lines, arcs, elliptical arcs, spirals, open polylines, or open splines. Below are the detailed steps to use this command:

1. **Access the Command**:
   - Type `BLEND` or `BLE` in the command line and press `Enter`.
2. **Select the First Object**:
   - The command prompts you to select the first object near the endpoint where you want the spline to start.
   - Click on the first line, arc, elliptical arc, spiral, open polyline, or open spline.
3. **Select the Second Object**:
   - Next, the command prompts you to select the second object near the endpoint where you want the spline to end.
   - Click on the second line, arc, elliptical arc, spiral, open polyline, or open spline.
4. **Finish the Command**:
   - Once the blend is created and adjusted to your satisfaction, you can exit the command by pressing `Esc` or starting a new command.

### **Example Workflow**

1. Draw two non-parallel lines that you want to connect smoothly.
2. Type `BLEND` and press `Enter`.
3. Select the endpoint of the first line.
4. Select the endpoint of the second line.
5. Adjust the spline using grips if needed.