---
title: Command Line List
description: "| Full Command Line | Abbreviated | Descriptions | | --- | --- | --- | | MEASURE | MEA | *Measure* | | [LINE](https://dwgsee.com/cad/support/docs/line/) | L | *Draw Line* | | [PLINE](https://dwgsee.com/cad/support/docs/polyline/) | PL | *Draw Polyline* | |…"
url: "https://www.dwgsee.com/cad/support/docs/dwgsee-cad-command-line-list/"
updated: "2025-07-10"
category: Get Started
tags:
  - Command Line
---

# Command Line List

| Full Command Line | Abbreviated | Descriptions |
| --- | --- | --- |
| MEASURE | MEA | *Measure* |
| [LINE](https://dwgsee.com/cad/support/docs/line/) | L | *Draw Line* |
| [PLINE](https://dwgsee.com/cad/support/docs/polyline/) | PL | *Draw Polyline* |
| [POLYGON](https://dwgsee.com/cad/support/docs/polygon/) | POL | *Draw Polygon (Center, Point）* |
| [POLYGON2](https://dwgsee.com/cad/support/docs/polygon/) | PLO2 | *Draw Polygon ( Two Corners)* |
| [RECTANGLE](https://dwgsee.com/cad/support/docs/rectangle/) | RECT, REC | *Draw Rectangle* |
| [ARC](https://dwgsee.com/cad/support/docs/arc/) | A | *Draw Arc* |
| [CIRCLE](https://dwgsee.com/cad/support/docs/circle/) | C | *Draw Circle (Center)* |
| [ELLIPSE](https://dwgsee.com/cad/support/docs/ellipse/) | EL | *Draw Ellipse* |
| INSERT | I | *Insert block from drawing* |
| BLOCK | B | *Create Block* |
| [HATCH](https://dwgsee.com/cad/support/docs/hatch/) | H | Create Hatch |
| MTEXT | MT | *Add Mtext* |
| [ERASE](https://dwgsee.com/cad/support/docs/erase/) | E | *Delete objects* |
| [COPY](https://dwgsee.com/cad/support/docs/copy/) | CP,CO | *Copy objects* |
| [MIRROR](https://dwgsee.com/cad/support/docs/mirror/) | MI | *Mirror objects* |
| [ARRAY](https://dwgsee.com/cad/support/docs/array/) | AR | *Array objects* |
| [MOVE](https://dwgsee.com/cad/support/docs/move/) | M | *Move objects* |
| [ROTATE](https://dwgsee.com/cad/support/docs/rotate/) | RO | *Rotate objects* |
| [SCALE](https://dwgsee.com/cad/support/docs/scale/) | SC | *Scale objects* |
| [STRETCH](https://dwgsee.com/cad/support/docs/stretch/) | S | *Stretch objects crossed by a selection window or polygon* |
| [TRIM](https://dwgsee.com/cad/support/docs/trim/) | TR | *Trim objects* |
| [EXTEND](https://dwgsee.com/cad/support/docs/extend/) | EX | *Extend objects* |
| [CHAMFER](https://dwgsee.com/cad/support/docs/chamfer/) | CHA | *Quick Chamfer (same distance)* |
| [CHAMFER2](https://dwgsee.com/cad/support/docs/chamfer/) | CHA2 | *Standard Chamfer (distance, angle, trim)* |
| [FILLET](https://dwgsee.com/cad/support/docs/fillet/) | F | *Round or fillet the edges* |
| [EXPLODE](https://dwgsee.com/cad/support/docs/explode/) | X | *Explode objects* |
| [WBLOCK](https://dwgsee.com/cad/support/docs/wblock/) | W | *Save selected objects or converts a block to a specified drawing file* |
| DIMLINEAR | DLI | *Linear Dimension* |
| DIMALIGNED | DAL | *Aligned Dimension* |
| DIMRADIUS | DRA | *Radius Dimension* |
| DIMDIAMETER | DDI | *Diameter Dimension* |
| DIMANGULAR | DAN | *Angular Dimension* |
| TOLERANCE | TOL | *Create Geometric Tolerances* |
| EDITTOL | ETOL | *Modify Geometric Tolerances* |
| QIDMBASE | QDB | *Quick dimension with base line* |
| DIMCENTER | DCE | *Circle center Dimension* |
| QLEADER | LE | *Creates a line that connects annotation to a feature* |
| MLEADER | MLE | *Create a multileader object* |
| QDIM | QDIM | *Quick dimension* |
| MERGEDIM | MERDIM, MED | *Merge dimensions* |
| SUPDIM | SDIM | *Super dimension* |
| EDITTEXT | ETXT | *Modify text* |
| ATTDEF | ATT | *Create an attribute definition for storing data in a block* |
| [MATCHPROP](https://dwgsee.com/cad/support/docs/matchprop/) | MA | *Apply the properties of a selected object to other objects* |
| TEXT | T | *Add text* |
| [OFFSET](https://dwgsee.com/cad/support/docs/offset/) | O | *Offset* |
| [TangentLine](https://dwgsee.com/cad/support/docs/tangentline/) | TLine, TL | *Draw tangent line* |
| ParallelLine | Parline, PRL | *Draw parallel line* |
| VerticalLine | VLine, VL | *Draw vertical line* |
| AngularLine | ALine, AGL | *Draw angluar line* |
| Bisector | Bsline, bsl | *Draw corner dividing lines* |
| [CenterLine](https://dwgsee.com/cad/support/docs/centerline/) | Cline, CL | *Draw center line* |
| [Circle](https://dwgsee.com/cad/support/docs/circle/)2P | CPP | *Draw circle with 2 points* |
| [Circle](https://dwgsee.com/cad/support/docs/circle/)3P | C3P | *Draw circle with 3 points* |
| [CircleTTR](https://dwgsee.com/cad/support/docs/circle/) | CTTR | *Draw circle with tan, tan, radius* |
| [CircleTTT](https://dwgsee.com/cad/support/docs/circle/) | CTTT | *Draw circle with tan, tan, tan* |
| [ARCCTA](https://dwgsee.com/cad/support/docs/arc/) | ACTA | *Draw arc with center, start, angle* |
| [ARCPPR](https://dwgsee.com/cad/support/docs/arc/) | APPR | *Draw arc with start, end, angle* |
| [POINT](https://dwgsee.com/cad/support/docs/point/) | PO | *Create a point object* |
| MulPoint | MPT | Create multiple points |
| DIVIDE | DIV | *Create evenly spaced point objects or blocks along the length or perimeter of an object* |
| Find | Find | *Find text* |
| FindEnt | FE | *Find entities* |
| FindRaplace | FR | *Find and replace text* |
| EDITATTRIBUTE | Editatt | *Modify block attribute data* |
| EDITTABLE | Editt,ET | *Modify table* |
| INSTABLE | INST,IT | *Insert table* |
| Imageattach | IA | *Attach raster images* |
| [MLINE](https://dwgsee.com/cad/support/docs/mline/) | ML | *Create multiple parallel lines* |
| [LENGTHEN](https://dwgsee.com/cad/support/docs/lengthen/) | LEN,LN | *Change the length of objects and the included angle of arcs* |
| Corner | CN | *Connect nearby lines* |
| [Donut](https://dwgsee.com/cad/support/docs/donut/) | DO | *Create a filled circle or a wide ring* |
| InsXref | IX | *Insert xref drawing* |
| [Join](https://dwgsee.com/cad/support/docs/join/) | J | *Join the endpoints of linear and curved objects* |
| [Break](https://dwgsee.com/cad/support/docs/break/) | BR | *Break the selected object between two points* |
| InsertOLE | InsOLE, IOLE | *Insert ole object* |
| ExLine | Eline, EL | *Extend line* |
| InsFromDWG | INSFD, IFD | *Insert block from other drawings* |
| ADCENTER | INSDC, IDC | *Insert block from design center* |
| EditDyBlk | EDDB, EDB | *Modify dynamic block* |
| ExCenterLine | ECL | *Extend center line* |
| ALIGNTEXT | ALTXT, ALT | *Add text above line* |
| ARCTEXT | ARCTXT, ART | *Add arc shape text* |
| DIMSERIAL | DIMSER, DS | *Add balloon annotation* |
| DIMSERIALSET | DSSET, DSET | *Balloon annotation settings* |
| DIMSERIALDATA | DSDATA, DSD | *Edit balloon part reference* data |
| DIMSERIALALIGN | DSALLIG, DSAG | *Align balloons* |
| DIMSERREORDER | DSORD, DSO | *Renumber balloons* |
| DIMSERMERGE | DSMG, DSM | *Merge balloons of same part data* |
| DIMSERINSTABLE | DSIT | *Insert BOM list part as table* |
| [REGION](https://dwgsee.com/cad/support/docs/region/) | REG | *Convert objects that enclose an area into a region* |
| [SPLINE](https://dwgsee.com/cad/support/docs/spline/) | SPL | *Create Spline* |
| DIMSERWITHDATA | DSWD | *Add Balloon with part reference data* |
| [ZOOM](https://dwgsee.com/cad/support/docs/zoom/) | Z | *Increase or decrease the magnification of the view* |
| GRID | GRID | *Displays a grid pattern in the current viewport* |
| DIMDRIVER | DIMDR | *Dimension driver* |
| DIMSYMDRIVER | DIMSDR | *Dimension symmetrical drive* |
| INSBLKDESIGNBIND | IBLKE | *Insert block with bind data* |
| WBLOCKB | WBLOCKB, WBB | *Wblock with a bmp file* |
| SHAFTCHAMFER | SCHAMFER | *Shaft chamfer* |
| HOLECHAMFER | HCHAMFER | *Hole chamfer* |
| HOLEUNDERCUT | HUNDERCUT | *Hole under cut* |
| SHAFTUNDERCUT | SUNDERCUT | S*haft under cut* |
| DIMCHAMFER | DIMCHM | C*hamfer annotation* |
| SCALEPART | SPART | *Add scale part data* |
| REVC | REVC | *Rectangle cloud line* |
| BLKREPLACE | BLKRP | *Replace block* |
| [PEDIT](https://dwgsee.com/cad/support/docs/pedit/) | PE | *Edit polyline* |
| [OVERKILL](https://dwgsee.com/cad/support/docs/overkill/) | OVERK | *Removes duplicate or overlapping objects* |
| TXTEXP | TXT | *Explode text as lines* |
| RG | RG | *Open DWGSee CAD Register Window* |
| MPL | MP | *Convert to polyline* |
| [WIPEOUT](https://dwgsee.com/cad/support/docs/wipeout/) | WI | *Create a wipeout object* |
| IMAGECLIP | IC | *Image clip* |
| XCLIP | XC | *Clip reference* |
| VPCLIP | VC | *Clip viewport* |
| PLDATA | PLD | *List polyline data* |
| [LAYER](https://dwgsee.com/cad/support/docs/layer/) | LA | *Layer manager* |
| LINESTOPL | LTP | *Convert lines to polyline* |
| SOLID | SO | *Create solid-filled triangles and quadrilaterals* |
| [LIST](https://dwgsee.com/cad/support/docs/list/) | LIST | *Display property data for selected objects* |
| [ARCPPD](https://dwgsee.com/cad/support/docs/arc/) | ARCPPD | *Draw arc with start, end, direction* |
| [ARCCPL](https://dwgsee.com/cad/support/docs/arc/) | ARCCPL | *Draw arc with center, start, length* |
| [PAN](https://dwgsee.com/cad/support/docs/pan/) | P | *Shift the view without changing the viewing direction or magnification* |
| [STYLE](https://dwgsee.com/cad/support/docs/style/) | ST | *Text style Manager* |
| DIMSTYLE | D | *Dimension style manager* |
| DDPTYPE | PTT | *Point style settings* |
| [LINETYPE](https://dwgsee.com/cad/support/docs/linetype/) | LT | *Linetype settings* |
| [REGEN](https://dwgsee.com/cad/support/docs/regen/) | RE | *Regenerate the drawing from within the current viewport* |
| [PURGE](https://dwgsee.com/cad/support/docs/purge/) | PU | *Remove unused items* |
| [ALIGN](https://dwgsee.com/cad/support/docs/align/) | AL | *Align objects* |
| [UNITS](https://dwgsee.com/cad/support/docs/units/) | UN | *Drawing units* |
| DIMCONTINUE | DIMCT | *Continue dimension* |
| DIMBASELINE | DBL | *Continue dimension with baseline* |
| [CIRCLEPPT](https://dwgsee.com/cad/support/docs/circle/) | PPT | *Draw circle with point, point, tangent* |
| [MLEDIT](https://dwgsee.com/cad/support/docs/mledit/) | MLED | *Mline edit* |
| MLSTYLE | MLS | *Mline settings* |
| [SCRIPT](https://dwgsee.com/cad/support/docs/script/) | SCRIPT | *Executes a sequence of commands from a script file* |
| GRADIENT | GRADIENT | *Create an enclosed area with a gradient fill* |
| DIMJOGGED | DJO | *Jogged dimension* |
| DCANGULAR | DCAN | *Constrain the angle between line or polyline segments* |
| PATHARRAY | PAR | *Path array* |
| [CIRPTT](https://dwgsee.com/cad/support/docs/circle/) | CPTT | *Draw circle with point ,tangent, tangent* |
| SELECTSIMILAR | SIM | *Select similar objects* |
| STATBLK | STATBL | *Block statistics* |
| STATTBLK | STATTBLK | *Insert block statistics result table* |
| NUMBER | NUM | *Add number annotations* |
| [XLINE](https://dwgsee.com/cad/support/docs/xline/) | XL | *Draw xline* |
| [NCOPY](https://dwgsee.com/cad/support/docs/ncopy/) | NCOPY | *Copy objects that are contained in an xref, block* |
| [DWFATTACH](https://dwgsee.com/cad/support/docs/dwfattach/) | DWFATTACH | *Insert dwf file* |
| [ISOLATEOBJECTS](https://dwgsee.com/cad/support/docs/isolate-objects/) | ISOLATEOBJECTS | *Temporarily suppress the display of all objects except those you select* |
| [HIDEOBJECTS](https://dwgsee.com/cad/support/docs/isolate-objects/) | HIDEOBJECTS | *Temporarily suppress the display of selected objects* |
| [UNISOLATEOBJECTS](https://dwgsee.com/cad/support/docs/isolate-objects/) | UNISOLATEOBJECTS | *Display objects previously hidden with the ISOLATEOBJECTS or HIDEOBJECTS command* |
| [ANNOALLVISIBLE](https://dwgsee.com/cad/support/docs/annoallvisible-system-variable/) | ANNOVALLVISIBLE | *Hide or display annotative objects that do not support the current annotation scale.* |
| [OOPS](https://dwgsee.com/cad/support/docs/oops/) | OOPS | *Restore erased objects* |
| [UNION](https://dwgsee.com/cad/support/docs/union/) | UNI | *Combine two or more regions into a single region* |
| [INTERSECT](https://dwgsee.com/cad/support/docs/intersect/) | IN | *Create a region from overlapping regions.* |
| [SUBTRACT](https://dwgsee.com/cad/support/docs/subtract-command/) | SU | *Create a region by subtracting one existing region objects* |
| [MASSPROP](https://dwgsee.com/cad/support/docs/massprop/) | MASSPROP | *Calculate the mass properties* |
| [RENAME](https://dwgsee.com/cad/support/docs/rename/) | REN | *Change the names assigned to named objects* |
| SNAP | SN | *Snap settings* |
| [BLENG](https://dwgsee.com/cad/support/docs/blend/) | BLE | *Create a smooth transition by inserting a spline* |
| [LIMITS](https://dwgsee.com/cad/support/docs/limits-command/) | LIMITS | *Set an invisible rectangular boundary* |
| DIMALIGN | DIMALIGN | *Dimension Alignment* |
| DIMOBLIQUE | DIMOBL | *Create Oblique Dimension* |
| TEXTALIGN | TA | *Aligns text vertically, horizontally, or obliquely* |
| DRAWORDER | DR | *Changes the draw order of images and other objects* |