ALIGNENTITIES #
Overview #
ALIGNENTITIES aligns multiple selected entities horizontally or vertically in DWGSeeCAD. It provides batch alignment for drawing objects, including left, center, right, top, middle and bottom alignment modes, and supports even distribution. It differs from the ALIGN command which uses point pairs for position and rotation matching.
Command Prompts #
- Choose alignment mode: Left / Center / Right / Top / Middle / Bottom / Distribute Horizontally / Distribute Vertically.
- Select entities: Pick two or more drawing objects to align.
- Press Enter to confirm selection.
- Selected entities will be rearranged automatically according to the chosen rule.
Available Alignment Modes #
- Align Left: Align all selected objects to the left boundary of the reference object
- Align Center: Align all selected objects to the vertical center axis
- Align Right: Align all selected objects to the right boundary of the reference object
- Align Top: Align all selected objects to the top boundary
- Align Middle: Align all selected objects to the horizontal center axis
- Align Bottom: Align all selected objects to the bottom boundary
- Distribute Horizontally: Space objects evenly along the horizontal direction
- Distribute Vertically: Space objects evenly along the vertical direction
Usage Notes #
- At least two objects must be selected to run this command.
- It works for common entities such as blocks, text, shapes, polylines and circles.
- ALIGNENTITIES only adjusts position; it does not rotate or scale objects.
- Use ALIGN if you need to align objects by source and destination point pairs with rotation or scaling.
Application Scenarios #
Use ALIGNENTITIES to tidy up drawing layouts, arrange title block text, organize schematic symbols, align tags and labels, and evenly space drawing components for electrical diagrams, P&ID drawings and sheet layouts.