DIMCONTINUE #
Overview #
The DIMCONTINUE command in DWGSeeCAD creates chained continued dimensions. It starts a new dimension from the second extension line of the previous or selected base dimension, and all dimension lines align on the same straight line. It supports linear, angular and ordinate dimensions. The new dimension inherits the dimension style from the base dimension by default.
Command Prompt Workflow #
- Enter DIMCONTINUE on the command line and press Enter.
- If no recent dimension exists, the prompt asks you to Select continued dimension, pick a linear, angular or ordinate dimension as the base.
- Prompt: Specify a second extension line origin or [Undo /Select] <Select>. Snap and click the next measuring point.
- The command repeats the prompt continuously, so you can keep adding sequential dimensions.
- Press Enter twice or press ESC to exit the command.
Options #
- Undo: Cancel the last continued dimension you placed.
- Select: Choose another base dimension to continue dimensioning from a different extension line.
Usage Notes #
- It must be used after a base linear, angular or ordinate dimension; it cannot start from scratch without a base dimension.
- Dimension lines are automatically aligned, unlike DIMBASELINE which stacks dimension lines outward from one shared baseline.
- Use object snap to capture endpoints, intersections for accurate dimension placement.
- All generated continued dimensions share the same dimension style as the base dimension.
Application Scenarios #
Use DIMCONTINUE for continuous chain dimensioning on architectural wall layouts, mechanical part profiles, fixture spacing, and electrical panel hole arrays. It is widely used for dimensioning a series of adjacent segments in one single row.