SOLID #
Overview #
The SOLID command in DWGSeeCAD creates filled 2D solid polygons (2D solid filled regions). You specify a series of corner points to define the shape, and the area inside the point boundary will be filled with the current color. This is different from 3D solid modeling; it is a flat 2D filled shape for drafting annotations.
Command Prompt Workflow #
- Enter SOLID on the command line and press Enter.
- Prompt: Specify first point: Click the first corner point.
- Prompt: Specify second point: Click the second corner point.
- Prompt: Specify third point: Click the third corner point.
- Prompt: Specify fourth point or <exit>: Click the fourth point, or press Enter to make a triangular solid.
- Continue entering third and fourth points to add adjacent filled shapes, or press ESC to exit the command.
Usage Notes #
- Point order matters. For quadrilaterals, enter points in a zig‑zag order (not clockwise or counter‑clockwise only), otherwise the fill may appear twisted or bowtie‑shaped.
- SOLID creates simple filled geometry, unlike HATCH which supports complex boundary patterns and gradient fills.
- The fill color follows the object’s assigned color, and it uses the current layer properties.
- This is a 2D drawing primitive, not a 3D solid body.
Application Scenarios #
Use SOLID for small solid filled markers, section indicator triangles, filled arrows, symbol backgrounds, and simple dark patches in schematic diagrams, architectural legends, electrical symbols and mechanical detail sketches.