ARCTEXT #
Overview #
The ARCTEXT command in DWGSeeCAD creates text that follows the curve of a selected arc. You control which side of the arc the text sits on, the reading direction relative to the arc center, text height, and the text content directly via command line prompts.

Command Prompt Workflow #
- Enter ARCTEXT on the command line and press Enter.
- Prompt: [Arc text] Select arc entity: Pick the target arc to be used as the path for curved text.
- Prompt: [Arc text] Place on convex side (V)/Place on concave side (C) <V>: Choose V for convex side (default) or C for concave side.
- Prompt: [Arc text] Text direction is outward from center (O)/Text direction is inward to center (I) <O>: Choose O for outward direction (default) or I for inward direction toward the arc center.
- Prompt: [Arc text] Specify text height:<2.50> Enter the desired text height or press Enter to accept the default value 2.50.
- Prompt: [Arc text] Input text string: Type the text you want to place along the arc and confirm.
- Arc-aligned text is generated automatically.
Options #
- V (Convex side): Place text on the convex side of the arc (default option).
- C (Concave side): Place text on the concave side of the arc.
- O (Outward from center): Text faces outward away from the arc center (default option).
- I (Inward to center): Text faces inward toward the arc center.
- Text height: Sets the character height of the arc text, default 2.50.
- Text string: The content of the curved text.
Usage Notes #
- This command only supports arc entities as the reference path; lines, circles and polylines are not supported.
- The arc text object is associated with the source arc.
- All parameters are set sequentially in the command line, no pop-up dialog.
- This is a DWGSeeCAD extended command.
Application Scenarios #
Use ARCTEXT for circular part labels, stamp text, curved markings, gear annotations and other curved text notes in mechanical drawings.