SHAFTCHAMFER #
Overview #
The SHAFTCHAMFER command in DWGSeeCAD creates geometric chamfer features for shaft parts. A dedicated Shaft chamfer dialog box lets you define chamfer Length(L) and Angle(a) with a preview diagram. It is a DWGSeeCAD exclusive extended command optimized for turning shaft profiles.

Command Prompt Workflow #
- Enter SHAFTCHAMFER on the command line and press Enter.
- Prompt: [Shaft chamfer ] Select shaft chamfering end face: Pick the end face of the shaft for chamfer creation.
- Prompt: [Shaft chamfer ] Select an outline of the turning surface: Select one outer profile line of the rotary turning surface.
- Prompt: [Shaft chamfer ] Select another outline of the turning surface: Select the opposite outer profile line of the rotary turning surface.
- The Shaft chamfer dialog opens:
- Length(L): Input the axial length of the chamfer.
- Angle(a): Input the chamfer angle relative to the shaft axis.
- Click OK to generate the chamfer geometry; click Cancel to abandon the operation.
Dialog Options #
- Length(L): Axial length dimension of the shaft chamfer.
- Angle(a): Chamfer angle between the chamfer slope and the shaft centerline.
- OK / Cancel: Confirm and create the chamfer, or close the dialog without changes.
Usage Notes #
- SHAFTCHAMFER generates chamfer geometry for shaft turning profiles. It differs from DIMCHAMFER, which only adds dimension text to an existing chamfer line.
- It requires selecting the shaft end face plus two opposite turning outlines to identify the rotary shaft geometry.
- Length and angle follow standard mechanical turning chamfer conventions.
- This is a custom DWGSeeCAD extended command and is not built into native AutoCAD.
Application Scenarios #
Use SHAFTCHAMFER for stepped shafts, pins, motor shafts and other lathe-turned rotary parts. It quickly generates accurate chamfer geometry for mechanical manufacturing drawings.